OMATOM POWER
Arduino Pro Micro ATmega32U4

Arduino Pro Micro ATmega32U4

Send Inquiry

DESCRIPTION

we are committed towards offering a wide range of Arduino Pro Micro ATmega32U4 which allows the Micro to appear to a connected computer as a mouse and keyboard, in addition to a virtual (CDC) serial / COM port. This is a microcontroller board based on the ATmega32U4, developed in conjunction with Adafruit. Arduino Pro Micro ATmega32U4 contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. Offered range has a 16 MHz crystal oscillator, 20 digital input/output pins, a micro USB connection, an ICSP header, and a reset button.

Technical Specifications :

  • ATmega32U4
  • Built in USB 2.0
  • Absolute maximum VCC: 6V
  • Maximum current for chip: 200mA
  • Maximum current per pin: 40mA
  • Recommended current per pin: 20mA
  • 8-bit Atmel AVR
  • Flash Program Memory: 32kB
  • EEPROM: 1kB
  • Internal SRAM 2.5kB
  • ADC: 10-bit
  • PWM: 8bit
  • High Speed PWM with programmable
  • Resolution from 2-11 bits

LEDS

  • Power: Red
  • RX: Yellow
  • TX: Green

SERIAL

  • Use Serial for the USB connection
  • Use Serial 1 for the hardware serial connection

POWER

  • RAW: 6V-16V
  • VCC: 5V at 500mA

USB

  • HID enabled
  • VID: 0x1B4F
  • PID: 0x9205 (boot loader); 0x9206 (sketch)